Skip to main content

RD-002 [ASL front lower arm for RWD drift car]

Lightweight & stylish!
ASL (Aluminum Super Light) Front Lower Arm is available now!

The new front lower arm has as much material removed as possible from each part to obtain both ultralight and high rigidity.
Front grip and rolling speed is dramatically improved.
Attaching the hub using a clamping design, with a turnbuckle, enables fine detailed adjustment of the arm length, which was previously difficult to achieve!

<Contents>
Front Lower Arm (L/R 1pc each), Cap screws for clump M2 x 5mm (2pcs)

<Spare parts>
In case of missing cap screws, spares are in avail
RC-001: M2 x 5mm cap screw (4pcs) 180 JPY

<Caution>
Please use Yokomo (Lunsford) titanium turnbuckles (ZC-TB ** B series).
If you use this turnbuckle, it can be firmly fixed via the clamp, they are lightweight and strong, so it is extremely compatible with the ultralight lower arm.
If you use a low-strength product such as Aluminum, it may be damaged in the event of a crash, and if it is damaged, some of the screws may remain inside the lower arm and cannot be removed.

ラベル:

Popular posts from this blog

AVS MODEL T7 wheel super high traction type new offset

 Offsets +6mm and +9mm are newly added to Super High Traction of T7 wheel! There are 4 types, +5mm, +6mm, +8mm and +9mm. By using "High Traction Wheel" and "Super High Traction Wheel" for the front and rear, you can easily change the front and rear traction balance. High traction wheels are easy to run from beginners to advanced users. INTEGRA IW-3206WH AVS MODEL T7 super high traction type / offset 6 white 2 pieces IW-3209WH AVS MODEL T7 super high traction type / offset 9 white 2 pieces IW-3206BK AVS MODEL T7 super high traction type [deep face] / offset 6 black 2 pieces IW-3209BK AVS MODEL T7 super high traction type [deep face] / offset 9 black 2 pieces
Read more

SPM Titanium King Pin Ball

King Pin ball of SPM (Super Precision Machine Cut) titanium series. The lightweight / high rigidity titanium has applied for high precision machine cut process to produce Φ5.9mm King Pin Ball which suits for very popular YD-2 series and other cars. The movement of the joint is smoothed by high-precision ball processing, and a significant increase in exercise performance can be expected due to its light weight. The beautiful appearance is perfect for looking up the machine. Please try it! * The dimensions are as shown in the above image. Please check the dimensions of each part before purchasing. RT-007-10 [SPM Titanium King Pin Ball (10mm Length Type / 2 pieces)]  RT-007-11 [SPM Titanium King Pin Ball (11mm Length Type / 2 pieces)] RT-007-12 [SPM Titanium King Pin Ball (12mm Length Type / 2 pieces)]
Read more

RD-004【 DRY CARBON MADE FRONT BUMPER 】

RD-004【 DRY CARBON MADE FRONT BUMPER 】3,200 JPY Front bumper made of lightweight and highly rigid dry carbon material! The lighter weight front overhang increases the rotational performance and minimizes time lost when transitioning and also increases the acceleration at the corner exit. The high rigidity of the dry carbon material ensures that the body posts are securely fixed even without an upper bumper brace. The included hard anodized aluminum plate is reversible. The Rêve D logo and the beautifully chamfered surface or the machine cut surface can be used as desired for 2 different looks! In addition to the YD-2 series, any chassis with the same shape front mount as the YD-2 series can be used regardless of the manufacturer. Please try and feel the advanced driving performance by reducing the weight of front section with dry carbon products. * Please note, a cushioning bumper mechanism has not been included with this product, please use a foam bumper or other similar product if yo...
Read more