YD-2 / RR conversion kit

For YD-2 equipped with Yokomo YD-2RR gearbox (Y2-RMC / rear motor conversion).

All made of 2mm black FRP.

The standard version is also compatible with the roundly slide rack.

Can also be equipped with an inboard suspension conversion kit.

However, you cannot lean forward.

When placing the short lipo horizontally, use the Yokomo DRB or Kamikaze one-touch battery holder.

When the short lipo is placed vertically, please use Yokomo YD-4.

Y2-RMC / rear motor conversion is required.

* With the inboard conversion kit, you need two Yokomo Y4-201P aluminum bell crank posts, one YD-2 upper arm holder, and two 36mm (about) turnpuckles (for dampers).

For low-profile servos of normal size (height 26 mm).

===============================

① YD-2 / RR conversion kit

② YD-2 / RR conversion kit with inboard conversion kit

③ Upper deck only.

④ FRP main chassis only.

⑤ FRP inverted servo stay set for Kamikaze slide rack

========================================

⑥ Premium conversion TYPE-M

* The main chassis is 2.4mm F.C.C. carbon.

2mm thick upper deck

========================================

The first picture is all of the basic kit.

AVS MODEL T7 wheel super high traction type new offset

Offsets +6mm and +9mm are newly added to Super High Traction of T7 wheel! There are 4 types, +5mm, +6mm, +8mm and +9mm. By using "High Traction Wheel" and "Super High Traction Wheel" for the front and rear, you can easily change the front and rear traction balance. High traction wheels are easy to run from beginners to advanced users. INTEGRA IW-3206WH AVS MODEL T7 super high traction type / offset 6 white 2 pieces IW-3209WH AVS MODEL T7 super high traction type / offset 9 white 2 pieces IW-3206BK AVS MODEL T7 super high traction type [deep face] / offset 6 black 2 pieces IW-3209BK AVS MODEL T7 super high traction type [deep face] / offset 9 black 2 pieces

SPM Titanium King Pin Ball

King Pin ball of SPM (Super Precision Machine Cut) titanium series. The lightweight / high rigidity titanium has applied for high precision machine cut process to produce Φ5.9mm King Pin Ball which suits for very popular YD-2 series and other cars. The movement of the joint is smoothed by high-precision ball processing, and a significant increase in exercise performance can be expected due to its light weight. The beautiful appearance is perfect for looking up the machine. Please try it! * The dimensions are as shown in the above image. Please check the dimensions of each part before purchasing. RT-007-10 [SPM Titanium King Pin Ball (10mm Length Type / 2 pieces)] RT-007-11 [SPM Titanium King Pin Ball (11mm Length Type / 2 pieces)] RT-007-12 [SPM Titanium King Pin Ball (12mm Length Type / 2 pieces)]

RD-004【 DRY CARBON MADE FRONT BUMPER 】

RD-004【 DRY CARBON MADE FRONT BUMPER 】3,200 JPY Front bumper made of lightweight and highly rigid dry carbon material! The lighter weight front overhang increases the rotational performance and minimizes time lost when transitioning and also increases the acceleration at the corner exit. The high rigidity of the dry carbon material ensures that the body posts are securely fixed even without an upper bumper brace. The included hard anodized aluminum plate is reversible. The Rêve D logo and the beautifully chamfered surface or the machine cut surface can be used as desired for 2 different looks! In addition to the YD-2 series, any chassis with the same shape front mount as the YD-2 series can be used regardless of the manufacturer. Please try and feel the advanced driving performance by reducing the weight of front section with dry carbon products. * Please note, a cushioning bumper mechanism has not been included with this product, please use a foam bumper or other similar product if yo...

KOTATSU HOBBIES

Search This Blog

Labels