Skip to main content

S-Line 7075 Front Axle for YD-2

S-Line 7075 Front Axle for YD-2
About 66% lighter! !!
The threaded part is designed to be slightly shorter than conventional products

TOPLINE
TP-161
Front axle for S-Line 7075 YD-2 　　/ 2 pieces

image

*This product is designed with the minimum clearance (zero) when the wheel is attached.
The wheel may not rotate smoothly depending on the knuckle or hub you use.

In that case, loosen the tightening of the nuts a little or finely adjust the position of the hub.

 

ラベル:

Popular posts from this blog

AVS MODEL T7 wheel super high traction type new offset

 Offsets +6mm and +9mm are newly added to Super High Traction of T7 wheel! There are 4 types, +5mm, +6mm, +8mm and +9mm. By using "High Traction Wheel" and "Super High Traction Wheel" for the front and rear, you can easily change the front and rear traction balance. High traction wheels are easy to run from beginners to advanced users. INTEGRA IW-3206WH AVS MODEL T7 super high traction type / offset 6 white 2 pieces IW-3209WH AVS MODEL T7 super high traction type / offset 9 white 2 pieces IW-3206BK AVS MODEL T7 super high traction type [deep face] / offset 6 black 2 pieces IW-3209BK AVS MODEL T7 super high traction type [deep face] / offset 9 black 2 pieces
Read more

SPM Titanium King Pin Ball

King Pin ball of SPM (Super Precision Machine Cut) titanium series. The lightweight / high rigidity titanium has applied for high precision machine cut process to produce Φ5.9mm King Pin Ball which suits for very popular YD-2 series and other cars. The movement of the joint is smoothed by high-precision ball processing, and a significant increase in exercise performance can be expected due to its light weight. The beautiful appearance is perfect for looking up the machine. Please try it! * The dimensions are as shown in the above image. Please check the dimensions of each part before purchasing. RT-007-10 [SPM Titanium King Pin Ball (10mm Length Type / 2 pieces)]  RT-007-11 [SPM Titanium King Pin Ball (11mm Length Type / 2 pieces)] RT-007-12 [SPM Titanium King Pin Ball (12mm Length Type / 2 pieces)]
Read more

RD-004【 DRY CARBON MADE FRONT BUMPER 】

RD-004【 DRY CARBON MADE FRONT BUMPER 】3,200 JPY Front bumper made of lightweight and highly rigid dry carbon material! The lighter weight front overhang increases the rotational performance and minimizes time lost when transitioning and also increases the acceleration at the corner exit. The high rigidity of the dry carbon material ensures that the body posts are securely fixed even without an upper bumper brace. The included hard anodized aluminum plate is reversible. The Rêve D logo and the beautifully chamfered surface or the machine cut surface can be used as desired for 2 different looks! In addition to the YD-2 series, any chassis with the same shape front mount as the YD-2 series can be used regardless of the manufacturer. Please try and feel the advanced driving performance by reducing the weight of front section with dry carbon products. * Please note, a cushioning bumper mechanism has not been included with this product, please use a foam bumper or other similar product if yo...
Read more